Alfonso Faustino: Motorola XPR 7550 VHF Transceiver (K6ASF)

My collection of Motorola hand-held transceivers is complete with the Motorola  XPR 7550 VHF hand-held transceiver, shown below.

The Motorola XPR 7550 VHF transceiver will take the place of my Motorola Radius CP200, as shown in the picture, below.  I will either sell or use it as a back-up for VHF communications.


Since I already have the Motorola XPR 7550e UHF, shown in the pic below, I really don’t need the “e” for my VHF transceiver.  The “e” version’s main updated features include, but is not limited to, the following:

  • The  “e” version can stay submerged in water for two hours; the non “e” version can stay under water for thirty minutes;
  • The “e” version has wi-fi feature; but, I never used it on my XPR 7550e; and,
  • The “e” version claims it has an 8% receive signal range — I never had any problems with receive signal range with the non “e” version; and, all my signal tests I’ve done with the non “e” version passed with flying colors.


As I mentioned in my past BLOGs, I don’t use VHF all that much; so, I didn’t need to spend the extra hundred bucks or so to get the “e” version — the non “e” version for my VHF operations has more than enough RF features for my VHF use.

Motorola APX 8000xe

The only time I would purchase another Motorola hand-held transceiver is, if by chance, they create a dual band, UHF/VHF, DMR hand-held transceiver…yeah, yeah, yeah…I know the Motorola APX 8000xe, shown above, has UHF, VHF, and 700-800 MHz bands with P25.

Well, that’s just swell and dandy, but it is not the transceiver I want.  I don’t mind dropping ~$8000 on the APX 8000xe, as long as it would make me happy by satisfying my emergency comm and social comm operations; it does all the stuff I want; but, it doesn’t have DMR — it has P25; and, I don’t use P25; I use DMR.

I would use P25 if it was more available in the San Francisco Bay Area, but P25 is rare and seldom used except by law enforcement, fire personnel, and EMS.  For my use, DMR is the digital platform that suits me best within and outside of the United States.

Also, at least for now, I’m an extreme XPR user and XPR code-plug specialist.

I know the ins and outs of the XPR series; and, it has more features for me than I could ever use or want in an emergency and social comm transceiver.

So, I said it once, and I will say it again, “know what you want.”  Having the most expensive this, that, and the other, doesn’t mean a damn thing if you ain’t gonna use it.  I use each and one of these transceivers shown, below; each one has different bands that I frequently use depending on my situation:

  • Motorola XPR 7550e (70 centimeters)
  • Motorola XPR 7550 (2 meters)
  • Motorola XPR 7580 (33 centimeters)

In this case, know the RX and TX band and platform you enjoy using the most and that is most available to you in your area, then purchase the transceiver that satisfies those needs.


Check 6!

/s/ Alfonso Faustino (K6ASF)


  1. Samuel Rhine says:

    Give me the CP200 plz, I always wanted one.

    Liked by 1 person

    1. Hi, Samuel. What transceiver do you use? What frequencies do you use?


    2. Hi, Samuel. What transceiver do you use? What frequencies do you use? Do you have a HAM license? What part of the world do you reside?


  2. Luis Castillo says:

    I like so much your page and can you give me an advice:

    is the motorola xpr7550e recommended for ham radio… DMR ? your advice plz



    1. Hi, Luis. Thank you! Sure, what do you need me to address regarding the Motorola?


Comments are closed.